The Inferosuperior Projection of the Zygomatic Arches X-Ray (commonly referred to as the “Jug-Handle” View or Tangential Zygomatic Arch Projection) is a specialized, low-exposure axial view designed to project the delicate, slender zygomatic arches free of overlying facial and cranial bone superimposition.

It includes two primary modalities:

  1. Bilateral Inferosuperior (SMV for Zygomatic Arches): Demonstrates both zygomatic arches simultaneously for side-by-side comparative symmetry.
  2. Unilateral Tangential (Oblique Inferosuperior): Tailored for depressed/flat zygomatic arches or patients with flat cheekbones who cannot project the arch clear of the skull on a standard SMV.

1. Clinical Indications & Contraindications

Detailed Indications:

Contraindications & Limitations:

2. Technical Factors & Exposure Physics

Because the zygomatic arches are thin, superficial bony bridges surrounded by soft tissue and air, using standard skull/base exposure will completely burn them out. Exposure factors must be substantially reduced compared to a standard skull SMV.

ParameterBilateral SMV Arch TechniqueUnilateral Tangential TechniqueRadiographic Rationale
Patient PostureErect (Seated) or SupineErect (Seated) or SupineErect allows maximal neck extension
Image Receptor (IR)24 x 30 cm (Landscape/Crosswise)18 × 24 cm (Portrait)Captures bilateral spread vs. isolated arch
SID100 to 115 cm ( 40 to 44 inches)100 to 115 cm ( 40 to 44 inches)Maintains geometric resolution
Grid UsageGrid (focused 8: 1) or Non-GridGrid (focused 8: 1) or Non-GridClean scatter; tabletop used for thin patients
Tube Potential (kVp)65 – 70 kVp (Low)60 – 68 kVp (VeryLow)High-contrast resolution; avoids over-penetration
mAs Range8 – 15 mAs (≈ 50%of Skull Base)6- 10 mAs(Reduced)Low exposure prevents burning out thin cortical rims
Focal SpotSmall (0.6 mm)Small (0.6 mm)Critical for resolving non-displaced hairline fractures
BreathingSuspended respirationSuspended respirationEliminates respiratory and swallowing motion

3. Step-by-Step Patient & Part Positioning

A. Bilateral Inferosuperior Method (Standard Jug-Handle)

SMV Zygomatic Arches Positioning Diagram
SMV Zygomatic Arches: Patient Positioning
Bilateral Jug-Handle View
[ Vertical Bucky Surface / Vertex on IR ]
Top of cranial vault flat against cassette
Vertex Resting on IR (Neck Hyper-extended)
(Elevates mandibular symphysis clear of arches)
IOML // Image Receptor (Parallel)
(Infraorbitomeatal line strictly parallel to IR)
Mid-Sagittal Plane (MSP) ⟂ IR (90°)
(Zero rotation ensures bilateral symmetry)
Central Ray: ⟂ IOML (Perpendicular)
Enters 1″ (2.5 cm) Inferior to Mandibular Symphysis
1

IOML Parallel (// IR)

Neck is hyper-extended until the infraorbitomeatal line is parallel to the plane of the image receptor.

2

CR Centering (1″ below Mentum)

Direct the perpendicular beam midway between zygomatic arches, entering 1 inch below the mandibular symphysis.

3

MSP Perpendicular (90°)

Mid-sagittal plane is centered perpendicular to prevent asymmetric overlap of arches on cranial anatomy.

4

Low Exposure Factors

Use lower mAs/kVp technique compared to routine cranial SMV to prevent burnout of thin zygomatic arches.

  1. Patient Posture: Seat the patient at the vertical Bucky with their back away from the board.
  2. Head Hyperextension: Extend the patient’s neck backward until the vertex of the skull rests against the center of the IR.
  3. Reference Line Alignment:
  4. Central Ray (CR):

B. Unilateral Tangential Method (Oblique Inferosuperior — For Depressed Arches)

When an arch is flat or depressed into the temporal fossa, a standard SMV will superimpose the parietal bone over the arch. The tangential technique isolates that single arch:

3-Step Tangential Positioning Rule (Unilateral Zygomatic Arch)

  1. Neck Extension: Hyperextend the patient’s neck until the Infraorbitomeatal Line (IOML) is positioned strictly parallel to the plane of the image receptor (IR).
  2. Head Rotation: Rotate the head 15⁰ toward the side of interest (affected side).
  3. Head Tilt: Tilt the top of the head 15⁰ away from the side of interest (unaffected side).

4. Positioning Errors & Radiographic Signs

Error TypeRadiographic Sign on FilmClinical ImpactCorrection
Under-Extension (Neck not extended enough)Mandibular symphysis/body superimposes over and obscures the anterior zygomatic arches.Obscures anterior arch fractures and ZMC joints.Extend neck further until IOML is strictly parallel to IR.
Over-Penetration (Standard skull kVp/mAs used)The zygomatic arches are completely burned out (radiolucent void).Fails to detect cortical integrity or fractures.Reduce mAs by 50% and lower kVp to 65-70 kVp.
Head Rotation (in Bilateral view)One zygomatic arch is projected wide; the other is superimposed over the lateral skull wall.Creates false asymmetry mimicking arch depression.Realign the Mid-Sagittal Plane (MSP) perpendicular to the IR.
Incorrect Angle in Tangential ViewParietal bone or mandibular ramus overlaps the isolated arch.Total failure of tangential projection.Strictly maintain the 15⁰ rotate toward / 15⁰ tilt away rule.

5. Radiographic Anatomy & Quality Evaluation Criteria

SMV Zygomatic Arches Anatomical Evaluation Card
SMV Zygomatic Arches: Anatomical Evaluation
Jug-Handle Profile
[ Vertex / Occiput ] [ Mandibular Symphysis ] Zygomatic Arch (Free of Bone) Zygomatic Arch (Free of Bone) Sphenoid / Maxilla FORAMEN MAGNUM
Bilateral Zygomatic Arches Free of Superimposition
1

Bilateral Arch Clearance

Both zygomatic arches are projected laterally without superimposition on the parietal bones or mandible.

2

Mandibular Symphysis Projection

Chin and symphysis are hyper-extended anteriorly, preventing overlap across the temporal and zygomatic bones.

3

Zero Cranial Tilt & Rotation

Symmetric distance from arches to lateral cranial cortex confirms precise MSP perpendicularity.

4

Optimal Soft-Tissue Exposure

Low-contrast technical factors prevent burnout of the delicate zygomatic temporal processes.